2 ################################################
3 ### Managed by someone's ansible provisioner ###
4 ################################################
5 # Part of: https://git.somenet.org/root/pub/somesible.git
6 # 2017-2024 by someone <someone@somenet.org>
8 # -----------------------------
9 # PostgreSQL configuration file
10 # -----------------------------
12 # This file consists of lines of the form:
16 # (The "=" is optional.) Whitespace may be used. Comments are introduced with
17 # "#" anywhere on a line. The complete list of parameter names and allowed
18 # values can be found in the PostgreSQL documentation.
20 # The commented-out settings shown in this file represent the default values.
21 # Re-commenting a setting is NOT sufficient to revert it to the default value;
22 # you need to reload the server.
24 # This file is read on server startup and when the server receives a SIGHUP
25 # signal. If you edit the file on a running system, you have to SIGHUP the
26 # server for the changes to take effect, run "pg_ctl reload", or execute
27 # "SELECT pg_reload_conf()". Some parameters, which are marked below,
28 # require a server shutdown and restart to take effect.
30 # Any parameter can also be given as a command-line option to the server, e.g.,
31 # "postgres -c log_connections=on". Some parameters can be changed at run time
32 # with the "SET" SQL command.
34 # Memory units: B = bytes Time units: us = microseconds
35 # kB = kilobytes ms = milliseconds
36 # MB = megabytes s = seconds
37 # GB = gigabytes min = minutes
38 # TB = terabytes h = hours
42 #------------------------------------------------------------------------------
44 #------------------------------------------------------------------------------
46 # The default values of these variables are driven from the -D command-line
47 # option or PGDATA environment variable, represented here as ConfigDir.
49 data_directory = '/var/lib/postgresql/15/main' # use data in another directory
50 # (change requires restart)
51 hba_file = '/etc/postgresql/15/main/pg_hba.conf' # host-based authentication file
52 # (change requires restart)
53 ident_file = '/etc/postgresql/15/main/pg_ident.conf' # ident configuration file
54 # (change requires restart)
56 # If external_pid_file is not explicitly set, no extra PID file is written.
57 external_pid_file = '/var/run/postgresql/15-main.pid' # write an extra PID file
58 # (change requires restart)
61 #------------------------------------------------------------------------------
62 # CONNECTIONS AND AUTHENTICATION
63 #------------------------------------------------------------------------------
65 # - Connection Settings -
67 listen_addresses = '*' # what IP address(es) to listen on;
68 # comma-separated list of addresses;
69 # defaults to 'localhost'; use '*' for all
70 # (change requires restart)
71 port = 5432 # (change requires restart)
72 max_connections = 500 # (change requires restart)
73 #superuser_reserved_connections = 3 # (change requires restart)
74 unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories
75 # (change requires restart)
76 #unix_socket_group = '' # (change requires restart)
77 unix_socket_permissions = 0770 # begin with 0 to use octal notation
78 # (change requires restart)
79 #bonjour = off # advertise server via Bonjour
80 # (change requires restart)
81 #bonjour_name = '' # defaults to the computer name
82 # (change requires restart)
85 # see "man tcp" for details
87 #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
88 # 0 selects the system default
89 #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
90 # 0 selects the system default
91 #tcp_keepalives_count = 0 # TCP_KEEPCNT;
92 # 0 selects the system default
93 #tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds;
94 # 0 selects the system default
96 #client_connection_check_interval = 0 # time between checks for client
97 # disconnection while running queries;
102 #authentication_timeout = 1min # 1s-600s
103 password_encryption = md5 # scram-sha-256 or md5
104 #db_user_namespace = off
106 # GSSAPI using Kerberos
107 #krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
108 #krb_caseins_users = off
114 ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'
117 ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'
118 #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
119 #ssl_prefer_server_ciphers = on
120 #ssl_ecdh_curve = 'prime256v1'
121 #ssl_min_protocol_version = 'TLSv1.2'
122 #ssl_max_protocol_version = ''
123 #ssl_dh_params_file = ''
124 #ssl_passphrase_command = ''
125 #ssl_passphrase_command_supports_reload = off
128 #------------------------------------------------------------------------------
129 # RESOURCE USAGE (except WAL)
130 #------------------------------------------------------------------------------
134 shared_buffers = 4GB # min 128kB
135 # (change requires restart)
136 #huge_pages = try # on, off, or try
137 # (change requires restart)
138 #huge_page_size = 0 # zero for system default
139 # (change requires restart)
140 temp_buffers = 4GB # min 800kB
141 #max_prepared_transactions = 0 # zero disables the feature
142 # (change requires restart)
143 # Caution: it is not advisable to set max_prepared_transactions nonzero unless
144 # you actively intend to use prepared transactions.
145 work_mem = 4GB # min 64kB
146 #hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem
147 maintenance_work_mem = 4GB # min 1MB
148 #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
149 #logical_decoding_work_mem = 64MB # min 64kB
150 #max_stack_depth = 2MB # min 100kB
151 #shared_memory_type = mmap # the default is the first option
152 # supported by the operating system:
156 # (change requires restart)
157 dynamic_shared_memory_type = posix # the default is usually the first option
158 # supported by the operating system:
163 # (change requires restart)
164 #min_dynamic_shared_memory = 0MB # (change requires restart)
168 #temp_file_limit = -1 # limits per-process temp file space
169 # in kilobytes, or -1 for no limit
171 # - Kernel Resources -
173 #max_files_per_process = 1000 # min 64
174 # (change requires restart)
176 # - Cost-Based Vacuum Delay -
178 #vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables)
179 #vacuum_cost_page_hit = 1 # 0-10000 credits
180 #vacuum_cost_page_miss = 2 # 0-10000 credits
181 #vacuum_cost_page_dirty = 20 # 0-10000 credits
182 #vacuum_cost_limit = 200 # 1-10000 credits
184 # - Background Writer -
186 #bgwriter_delay = 200ms # 10-10000ms between rounds
187 #bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables
188 #bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
189 #bgwriter_flush_after = 512kB # measured in pages, 0 disables
191 # - Asynchronous Behavior -
193 #backend_flush_after = 0 # measured in pages, 0 disables
194 #effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
195 #maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching
196 #max_worker_processes = 8 # (change requires restart)
197 #max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
198 #max_parallel_maintenance_workers = 2 # taken from max_parallel_workers
199 #max_parallel_workers = 8 # maximum number of max_worker_processes that
200 # can be used in parallel operations
201 #parallel_leader_participation = on
202 #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
203 # (change requires restart)
206 #------------------------------------------------------------------------------
208 #------------------------------------------------------------------------------
212 #wal_level = replica # minimal, replica, or logical
213 # (change requires restart)
214 #fsync = on # flush data to disk for crash safety
215 # (turning this off can cause
216 # unrecoverable data corruption)
217 #synchronous_commit = on # synchronization level;
218 # off, local, remote_write, remote_apply, or on
219 #wal_sync_method = fsync # the default is the first option
220 # supported by the operating system:
222 # fdatasync (default on Linux and FreeBSD)
226 #full_page_writes = on # recover from partial page writes
227 #wal_log_hints = off # also do full page writes of non-critical updates
228 # (change requires restart)
229 #wal_compression = off # enables compression of full-page writes;
230 # off, pglz, lz4, zstd, or on
231 #wal_init_zero = on # zero-fill new WAL files
232 #wal_recycle = on # recycle WAL files
233 #wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
234 # (change requires restart)
235 #wal_writer_delay = 200ms # 1-10000 milliseconds
236 #wal_writer_flush_after = 1MB # measured in pages, 0 disables
237 #wal_skip_threshold = 2MB
239 #commit_delay = 0 # range 0-100000, in microseconds
240 #commit_siblings = 5 # range 1-1000
244 checkpoint_timeout = 15min # range 30s-1d
245 #checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0
246 #checkpoint_flush_after = 256kB # measured in pages, 0 disables
247 #checkpoint_warning = 30s # 0 disables
251 # - Prefetching during recovery -
253 #recovery_prefetch = try # prefetch pages referenced in the WAL?
254 #wal_decode_buffer_size = 512kB # lookahead window used for prefetching
255 # (change requires restart)
259 #archive_mode = off # enables archiving; off, on, or always
260 # (change requires restart)
261 #archive_library = '' # library to use to archive a logfile segment
262 # (empty string indicates archive_command should
264 #archive_command = '' # command to use to archive a logfile segment
265 # placeholders: %p = path of file to archive
266 # %f = file name only
267 # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
268 #archive_timeout = 0 # force a logfile segment switch after this
269 # number of seconds; 0 disables
271 # - Archive Recovery -
273 # These are only used in recovery mode.
275 #restore_command = '' # command to use to restore an archived logfile segment
276 # placeholders: %p = path of file to restore
277 # %f = file name only
278 # e.g. 'cp /mnt/server/archivedir/%f %p'
279 #archive_cleanup_command = '' # command to execute at every restartpoint
280 #recovery_end_command = '' # command to execute at completion of recovery
282 # - Recovery Target -
284 # Set these only when performing a targeted recovery.
286 #recovery_target = '' # 'immediate' to end recovery as soon as a
287 # consistent state is reached
288 # (change requires restart)
289 #recovery_target_name = '' # the named restore point to which recovery will proceed
290 # (change requires restart)
291 #recovery_target_time = '' # the time stamp up to which recovery will proceed
292 # (change requires restart)
293 #recovery_target_xid = '' # the transaction ID up to which recovery will proceed
294 # (change requires restart)
295 #recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed
296 # (change requires restart)
297 #recovery_target_inclusive = on # Specifies whether to stop:
298 # just after the specified recovery target (on)
299 # just before the recovery target (off)
300 # (change requires restart)
301 #recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID
302 # (change requires restart)
303 #recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown'
304 # (change requires restart)
307 #------------------------------------------------------------------------------
309 #------------------------------------------------------------------------------
311 # - Sending Servers -
313 # Set these on the primary and on any standby that will send replication data.
315 #max_wal_senders = 10 # max number of walsender processes
316 # (change requires restart)
317 #max_replication_slots = 10 # max number of replication slots
318 # (change requires restart)
319 #wal_keep_size = 0 # in megabytes; 0 disables
320 #max_slot_wal_keep_size = -1 # in megabytes; -1 disables
321 #wal_sender_timeout = 60s # in milliseconds; 0 disables
322 #track_commit_timestamp = off # collect timestamp of transaction commit
323 # (change requires restart)
327 # These settings are ignored on a standby server.
329 #synchronous_standby_names = '' # standby servers that provide sync rep
330 # method to choose sync standbys, number of sync standbys,
331 # and comma-separated list of application_name
332 # from standby(s); '*' = all
333 #vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
335 # - Standby Servers -
337 # These settings are ignored on a primary server.
339 #primary_conninfo = '' # connection string to sending server
340 #primary_slot_name = '' # replication slot on sending server
341 #promote_trigger_file = '' # file name whose presence ends recovery
342 #hot_standby = on # "off" disallows queries during recovery
343 # (change requires restart)
344 #max_standby_archive_delay = 30s # max delay before canceling queries
345 # when reading WAL from archive;
346 # -1 allows indefinite delay
347 #max_standby_streaming_delay = 30s # max delay before canceling queries
348 # when reading streaming WAL;
349 # -1 allows indefinite delay
350 #wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name
352 #wal_receiver_status_interval = 10s # send replies at least this often
354 #hot_standby_feedback = off # send info from standby to prevent
356 #wal_receiver_timeout = 60s # time that receiver waits for
357 # communication from primary
358 # in milliseconds; 0 disables
359 #wal_retrieve_retry_interval = 5s # time to wait before retrying to
360 # retrieve WAL after a failed attempt
361 #recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery
365 # These settings are ignored on a publisher.
367 #max_logical_replication_workers = 4 # taken from max_worker_processes
368 # (change requires restart)
369 #max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
372 #------------------------------------------------------------------------------
374 #------------------------------------------------------------------------------
376 # - Planner Method Configuration -
378 #enable_async_append = on
379 #enable_bitmapscan = on
380 #enable_gathermerge = on
382 #enable_hashjoin = on
383 #enable_incremental_sort = on
384 #enable_indexscan = on
385 #enable_indexonlyscan = on
386 #enable_material = on
388 #enable_mergejoin = on
389 #enable_nestloop = on
390 #enable_parallel_append = on
391 #enable_parallel_hash = on
392 #enable_partition_pruning = on
393 #enable_partitionwise_join = off
394 #enable_partitionwise_aggregate = off
399 # - Planner Cost Constants -
401 #seq_page_cost = 1.0 # measured on an arbitrary scale
402 #random_page_cost = 4.0 # same scale as above
403 #cpu_tuple_cost = 0.01 # same scale as above
404 #cpu_index_tuple_cost = 0.005 # same scale as above
405 #cpu_operator_cost = 0.0025 # same scale as above
406 #parallel_setup_cost = 1000.0 # same scale as above
407 #parallel_tuple_cost = 0.1 # same scale as above
408 #min_parallel_table_scan_size = 8MB
409 #min_parallel_index_scan_size = 512kB
410 #effective_cache_size = 4GB
412 #jit_above_cost = 100000 # perform JIT compilation if available
413 # and query more expensive than this;
415 #jit_inline_above_cost = 500000 # inline small functions if query is
416 # more expensive than this; -1 disables
417 #jit_optimize_above_cost = 500000 # use expensive JIT optimizations if
418 # query is more expensive than this;
421 # - Genetic Query Optimizer -
425 #geqo_effort = 5 # range 1-10
426 #geqo_pool_size = 0 # selects default based on effort
427 #geqo_generations = 0 # selects default based on effort
428 #geqo_selection_bias = 2.0 # range 1.5-2.0
429 #geqo_seed = 0.0 # range 0.0-1.0
431 # - Other Planner Options -
433 #default_statistics_target = 100 # range 1-10000
434 #constraint_exclusion = partition # on, off, or partition
435 #cursor_tuple_fraction = 0.1 # range 0.0-1.0
436 #from_collapse_limit = 8
437 #jit = on # allow JIT compilation
438 #join_collapse_limit = 8 # 1 disables collapsing of explicit
440 #plan_cache_mode = auto # auto, force_generic_plan or
442 #recursive_worktable_factor = 10.0 # range 0.001-1000000
445 #------------------------------------------------------------------------------
446 # REPORTING AND LOGGING
447 #------------------------------------------------------------------------------
451 #log_destination = 'stderr' # Valid values are combinations of
452 # stderr, csvlog, jsonlog, syslog, and
453 # eventlog, depending on platform.
454 # csvlog and jsonlog require
455 # logging_collector to be on.
457 # This is used when logging to stderr:
458 #logging_collector = off # Enable capturing of stderr, jsonlog,
459 # and csvlog into log files. Required
460 # to be on for csvlogs and jsonlogs.
461 # (change requires restart)
463 # These are only used if logging_collector is on:
464 #log_directory = 'log' # directory where log files are written,
465 # can be absolute or relative to PGDATA
466 #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
467 # can include strftime() escapes
468 #log_file_mode = 0600 # creation mode for log files,
469 # begin with 0 to use octal notation
470 #log_rotation_age = 1d # Automatic rotation of logfiles will
471 # happen after that time. 0 disables.
472 #log_rotation_size = 10MB # Automatic rotation of logfiles will
473 # happen after that much log output.
475 #log_truncate_on_rotation = off # If on, an existing log file with the
476 # same name as the new log file will be
477 # truncated rather than appended to.
478 # But such truncation only occurs on
479 # time-driven rotation, not on restarts
480 # or size-driven rotation. Default is
481 # off, meaning append to existing files
484 # These are relevant when logging to syslog:
485 #syslog_facility = 'LOCAL0'
486 #syslog_ident = 'postgres'
487 #syslog_sequence_numbers = on
488 #syslog_split_messages = on
490 # This is only relevant when logging to eventlog (Windows):
491 # (change requires restart)
492 #event_source = 'PostgreSQL'
496 log_min_messages = info # values in order of decreasing detail:
510 log_min_error_statement = error # values in order of decreasing detail:
522 # panic (effectively off)
524 #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
525 # and their durations, > 0 logs only
526 # statements running at least this number
529 #log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements
530 # and their durations, > 0 logs only a sample of
531 # statements running at least this number
533 # sample fraction is determined by log_statement_sample_rate
535 #log_statement_sample_rate = 1.0 # fraction of logged statements exceeding
536 # log_min_duration_sample to be logged;
537 # 1.0 logs all such statements, 0.0 never logs
540 #log_transaction_sample_rate = 0.0 # fraction of transactions whose statements
541 # are logged regardless of their duration; 1.0 logs all
542 # statements from all transactions, 0.0 never logs
544 #log_startup_progress_interval = 10s # Time between progress updates for
545 # long-running startup operations.
546 # 0 disables the feature, > 0 indicates
547 # the interval in milliseconds.
551 #debug_print_parse = off
552 #debug_print_rewritten = off
553 #debug_print_plan = off
554 #debug_pretty_print = on
555 log_autovacuum_min_duration = 0 # log autovacuum activity;
556 # -1 disables, 0 logs all actions and
557 # their durations, > 0 logs only
558 # actions running at least this number
560 #log_checkpoints = on
562 log_disconnections = on
564 #log_error_verbosity = default # terse, default, or verbose messages
566 log_line_prefix = '%t %q[%u@%d] ' # special values:
567 # %a = application name
570 # %r = remote host and port
574 # %P = process ID of parallel group leader
575 # %t = timestamp without milliseconds
576 # %m = timestamp with milliseconds
577 # %n = timestamp with milliseconds (as a Unix epoch)
578 # %Q = query ID (0 if none or not computed)
582 # %l = session line number
583 # %s = session start timestamp
584 # %v = virtual transaction ID
585 # %x = transaction ID (0 if none)
586 # %q = stop here in non-session
590 #log_lock_waits = off # log lock waits >= deadlock_timeout
591 #log_recovery_conflict_waits = off # log standby recovery conflict waits
592 # >= deadlock_timeout
593 #log_parameter_max_length = -1 # when logging statements, limit logged
594 # bind-parameter values to N bytes;
595 # -1 means print in full, 0 disables
596 #log_parameter_max_length_on_error = 0 # when logging an error, limit logged
597 # bind-parameter values to N bytes;
598 # -1 means print in full, 0 disables
599 #log_statement = 'none' # none, ddl, mod, all
600 #log_replication_commands = off
601 #log_temp_files = -1 # log temporary files equal or larger
602 # than the specified size in kilobytes;
603 # -1 disables, 0 logs all temp files
604 log_timezone = 'Europe/Vienna'
607 #------------------------------------------------------------------------------
609 #------------------------------------------------------------------------------
611 cluster_name = '15/main' # added to process titles if nonempty
612 # (change requires restart)
613 #update_process_title = on
616 #------------------------------------------------------------------------------
618 #------------------------------------------------------------------------------
620 # - Cumulative Query and Index Statistics -
622 #track_activities = on
623 #track_activity_query_size = 1024 # (change requires restart)
626 track_wal_io_timing = on
627 #track_functions = none # none, pl, all
628 #stats_fetch_consistency = cache
633 #compute_query_id = auto
634 #log_statement_stats = off
635 #log_parser_stats = off
636 #log_planner_stats = off
637 #log_executor_stats = off
640 #------------------------------------------------------------------------------
642 #------------------------------------------------------------------------------
644 #autovacuum = on # Enable autovacuum subprocess? 'on'
645 # requires track_counts to also be on.
646 autovacuum_max_workers = 1 # max number of autovacuum subprocesses
647 # (change requires restart)
648 autovacuum_naptime = 15min # time between autovacuum runs
649 autovacuum_vacuum_threshold = 5000 # min number of row updates before
651 autovacuum_vacuum_insert_threshold = 50000 # min number of row inserts
652 # before vacuum; -1 disables insert
654 autovacuum_analyze_threshold = 5000 # min number of row updates before
656 #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
657 #autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table
658 # size before insert vacuum
659 #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
660 autovacuum_freeze_max_age = 800000000 # maximum XID age before forced vacuum
661 # (change requires restart)
662 autovacuum_multixact_freeze_max_age = 1000000000 # maximum multixact age
663 # before forced vacuum
664 # (change requires restart)
665 autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
666 # autovacuum, in milliseconds;
667 # -1 means use vacuum_cost_delay
668 #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
669 # autovacuum, -1 means use
673 #------------------------------------------------------------------------------
674 # CLIENT CONNECTION DEFAULTS
675 #------------------------------------------------------------------------------
677 # - Statement Behavior -
679 #client_min_messages = notice # values in order of decreasing detail:
689 #search_path = '"$user", public' # schema names
691 #default_table_access_method = 'heap'
692 #default_tablespace = '' # a tablespace name, '' uses the default
693 #default_toast_compression = 'pglz' # 'pglz' or 'lz4'
694 #temp_tablespaces = '' # a list of tablespace names, '' uses
695 # only default tablespace
696 #check_function_bodies = on
697 #default_transaction_isolation = 'read committed'
698 #default_transaction_read_only = off
699 #default_transaction_deferrable = off
700 #session_replication_role = 'origin'
701 #statement_timeout = 0 # in milliseconds, 0 is disabled
702 #lock_timeout = 0 # in milliseconds, 0 is disabled
703 #idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
704 #idle_session_timeout = 0 # in milliseconds, 0 is disabled
705 #vacuum_freeze_table_age = 150000000
706 #vacuum_freeze_min_age = 50000000
707 #vacuum_failsafe_age = 1600000000
708 #vacuum_multixact_freeze_table_age = 150000000
709 #vacuum_multixact_freeze_min_age = 5000000
710 #vacuum_multixact_failsafe_age = 1600000000
711 #bytea_output = 'hex' # hex, escape
712 #xmlbinary = 'base64'
713 #xmloption = 'content'
714 #gin_pending_list_limit = 4MB
716 # - Locale and Formatting -
718 datestyle = 'iso, dmy'
719 #intervalstyle = 'postgres'
720 timezone = 'Europe/Vienna'
721 #timezone_abbreviations = 'Default' # Select the set of available time zone
722 # abbreviations. Currently, there are
724 # Australia (historical usage)
726 # You can create your own file in
727 # share/timezonesets/.
728 #extra_float_digits = 1 # min -15, max 3; any value >0 actually
729 # selects precise output mode
730 #client_encoding = sql_ascii # actually, defaults to database
733 # These settings are initialized by initdb, but they can be changed.
734 lc_messages = 'en_US.UTF-8' # locale for system error message
736 lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
737 lc_numeric = 'en_US.UTF-8' # locale for number formatting
738 lc_time = 'en_US.UTF-8' # locale for time formatting
740 # default configuration for text search
741 default_text_search_config = 'pg_catalog.english'
743 # - Shared Library Preloading -
745 #local_preload_libraries = ''
746 #session_preload_libraries = ''
747 #shared_preload_libraries = '' # (change requires restart)
748 #jit_provider = 'llvmjit' # JIT library to use
752 #dynamic_library_path = '$libdir'
753 #extension_destdir = '' # prepend path when loading extensions
754 # and shared objects (added by Debian)
755 #gin_fuzzy_search_limit = 0
758 #------------------------------------------------------------------------------
760 #------------------------------------------------------------------------------
762 deadlock_timeout = 15s
763 #max_locks_per_transaction = 64 # min 10
764 # (change requires restart)
765 #max_pred_locks_per_transaction = 64 # min 10
766 # (change requires restart)
767 #max_pred_locks_per_relation = -2 # negative values mean
768 # (max_pred_locks_per_transaction
769 # / -max_pred_locks_per_relation) - 1
770 #max_pred_locks_per_page = 2 # min 0
773 #------------------------------------------------------------------------------
774 # VERSION AND PLATFORM COMPATIBILITY
775 #------------------------------------------------------------------------------
777 # - Previous PostgreSQL Versions -
780 #backslash_quote = safe_encoding # on, off, or safe_encoding
781 #escape_string_warning = on
782 #lo_compat_privileges = off
783 #quote_all_identifiers = off
784 #standard_conforming_strings = on
785 #synchronize_seqscans = on
787 # - Other Platforms and Clients -
789 #transform_null_equals = off
792 #------------------------------------------------------------------------------
794 #------------------------------------------------------------------------------
796 #exit_on_error = off # terminate session on any error?
797 #restart_after_crash = on # reinitialize after backend crash?
798 #data_sync_retry = off # retry or panic on failure to fsync
800 # (change requires restart)
801 #recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+)
804 #------------------------------------------------------------------------------
805 # CONFIG FILE INCLUDES
806 #------------------------------------------------------------------------------
808 # These options allow settings to be loaded from files other than the
809 # default postgresql.conf. Note that these are directives, not variable
810 # assignments, so they can usefully be given more than once.
812 include_dir = 'conf.d' # include files ending in '.conf' from
813 # a directory, e.g., 'conf.d'
814 #include_if_exists = '...' # include file only if it exists
815 #include = '...' # include file
818 #------------------------------------------------------------------------------
820 #------------------------------------------------------------------------------
822 # Add settings for extensions here
SomeNet / public repos / root / pub / somesible.git / blob