[roles/util] ----- meta ----- No dependencies

[root/pub/somesible.git] / roles / server / irc-services / files / default / modules.conf

#
################################################
### Managed by someone's ansible provisioner ###
################################################
# Part of: https://git.somenet.org/root/pub/somesible.git
# 2017-2024 by someone <someone@somenet.org>
#

/*
 * [OPTIONAL] Non-Core Modules
 *
 * The following blocks are used to load all non-core modules, including 3rd-party modules.
 * Modules can be prevented from loading by commenting out the line, other modules can be added by
 * adding a module block. These modules will be loaded prior to Services connecting to your network.
 *
 * Note that some of these modules are labeled EXTRA, and must be enabled prior to compiling by
 * running the 'extras' script on Linux and UNIX.
 */

/*
 * help
 *
 * Provides the command generic/help.
 *
 * This is a generic help command that can be used with any client.
 */
module { name = "help" }

/*
 * m_dns
 *
 * Adds support for the DNS protocol. By itself this module does nothing useful,
 * but other modules such as m_dnsbl and os_dns require this.
 */
#module
{
        name = "m_dns"

        /*
         * The nameserver to use for resolving hostnames, must be an IP or a resolver configuration file.
         * The below should work fine on all unix like systems. Windows users will have to find their nameservers
         * from ipconfig /all and put the IP here.
         */
        nameserver = "/etc/resolv.conf"
        #nameserver = "127.0.0.1"

        /*
         * How long to wait in seconds before a DNS query has timed out.
         */
        timeout = 5


        /* Only edit below if you are expecting to use os_dns or otherwise answer DNS queries. */

        /*
         * The IP and port services use to listen for DNS queries.
         * Note that ports less than 1024 are privileged on UNIX/Linux systems, and
         * require Anope to be started as root. If you do this, it is recommended you
         * set options:user and options:group so Anope can change users after binding
         * to this port.
         */
        ip = "0.0.0.0"
        port = 53


        /*
         * SOA record information.
         */

        /* E-mail address of the DNS administrator. */
        admin = "admin@example.com"

        /* This should be the names of the public facing nameservers serving the records. */
        nameservers = "ns1.example.com ns2.example.com"

        /* The time slave servers are allowed to cache. This should be reasonably low
         * if you want your records to be updated without much delay.
         */
        refresh = 3600

        /* A notify block. There should probably be one per nameserver listed in 'nameservers'.
         */
        notify
        {
                ip = "192.0.2.0"
                port = 53
        }
}

/*
 * m_dnsbl
 *
 * Allows configurable DNS blacklists to check connecting users against. If a user
 * is found on the blacklist they will be immediately banned. This is a crucial module
 * to prevent bot attacks.
 */
#module
{
        name = "m_dnsbl"

        /*
         * If set, Services will check clients against the DNSBLs when services connect to its uplink.
         * This is not recommended, and on large networks will open a very large amount of DNS queries.
         * Whilst services are not drastically affected by this, your nameserver/DNSBL might care.
         */
        check_on_connect = no

        /*
         * If set, Services will check clients when coming back from a netsplit. This can cause a large number
         * of DNS queries open at once. Whilst services are not drastically affected by this, your nameserver/DNSBL
         * might care.
         */
        check_on_netburst = no

        /*
         * If set, OperServ will add clients found in the DNSBL to the akill list. Without it, OperServ simply sends
         * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being fill up by bots.
         */
        add_to_akill = yes

        blacklist
        {
                /* Name of the blacklist. */
                name = "rbl.efnetrbl.org"

                /* How long to set the ban for. */
                time = 4h

                /* Reason for akill.
                 * %n is the nick of the user
                 * %u is the ident/username of the user
                 * %g is the realname of the user
                 * %h is the hostname of the user
                 * %i is the IP of the user
                 * %r is the reply reason (configured below). Will be nothing if not configured.
                 * %N is the network name set in networkinfo:networkname
                 */
                reason = "You are listed in the efnet RBL, visit http://rbl.efnetrbl.org/?i=%i for info"

                /* Replies to ban and their reason. If no relies are configured, all replies get banned. */
                reply
                {
                        code = 1
                        reason = "Open Proxy"
                }

                #reply
                {
                        code = 2
                        reason = "spamtrap666"
                }

                #reply
                {
                        code = 3
                        reason = "spamtrap50"
                }

                reply
                {
                        code = 4
                        reason = "TOR"

                        /*
                         * If set, users identified to services at the time the result comes back
                         * will not be banned.
                         */
                        #allow_account = yes
                }

                reply
                {
                        code = 5
                        reason = "Drones / Flooding"
                }
        }

        #blacklist
        {
                name = "dnsbl.dronebl.org"
                time = 4h
                reason = "You have a host listed in the DroneBL. For more information, visit http://dronebl.org/lookup_branded?ip=%i&network=%N"
        }

        /* Exempt localhost from DNSBL checks */
        exempt { ip = "127.0.0.1" }
}

/*
 * m_helpchan
 *
 * Gives users who are op in the specified help channel usermode +h (helpop).
 */
#module
{
        name = "m_helpchan"

        helpchannel = "#help"
}

/*
 * m_httpd
 *
 * Allows services to serve web pages. By itself, this module does nothing useful.
 *
 * Note that using this will allow users to get the IP of your services.
 * To prevent this we recommend using a reverse proxy or a tunnel.
 */
#module
{
        name = "m_httpd"

        httpd
        {
                /* Name of this service. */
                name = "httpd/main"

                /* IP to listen on. */
                ip = "0.0.0.0"

                /* Port to listen on. */
                port = 8080

                /* Time before connections to this server are timed out. */
                timeout = 30

                /* Listen using SSL. Requires an SSL module. */
                #ssl = yes

                /* If you are using a reverse proxy that sends one of the
                 * extforward_headers set below, set this to its IP.
                 * This allows services to obtain the real IP of users by
                 * reading the forwarded-for HTTP header.
                 */
                #extforward_ip = "192.168.0.255"

                /* The header to look for. These probably work as is. */
                extforward_header = "X-Forwarded-For Forwarded-For"
        }
}

/*
 * m_ldap [EXTRA]
 *
 * This module allows other modules to use LDAP. By itself, this module does nothing useful.
 */
#module
{
        name = "m_ldap"

        ldap
        {
                server = "ldap://127.0.0.1"
                port = 389

                /*
                 * Admin credentials used for performing searches and adding users.
                 */
                admin_binddn = "cn=Manager,dc=anope,dc=org"
                admin_password = "secret"
        }
}

/*
 * m_ldap_authentication [EXTRA]
 *
 * This module allows many commands such as IDENTIFY, RELEASE, RECOVER, GHOST, etc. use
 * LDAP to authenticate users. Requires m_ldap.
*/
#module
{
        name = "m_ldap_authentication"

        /*
         * The distinguished name used for searching for users's accounts.
         */
        basedn = "ou=users,dc=anope,dc=org"

        /*
         * The search filter used to look up users's accounts.
         * %account is replaced with the user's account.
         * %object_class is replaced with the object_class configured below.
         */
        search_filter = "(&(uid=%account)(objectClass=%object_class))"

        /*
         * The object class used by LDAP to store user account information.
         * This is used for adding new users to LDAP if registration is allowed.
         */
        object_class = "anopeUser"

        /*
         * The attribute value used for account names.
         */
        username_attribute = "uid"

        /*
         * The attribute value used for email addresses.
         * This directive is optional.
         */
        email_attribute = "email"

        /*
         * The attribute value used for passwords.
         * Used when registering new accounts in LDAP.
         */
        password_attribute = "userPassword"

        /*
         * If set, the reason to give the users who try to register with nickserv,
         * including nick registration from grouping.
         *
         * If not set, then registration is not blocked.
         */
        #disable_register_reason = "To register on this network visit http://some.misconfigured.site/register"

        /*
         * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
         * If not set, then email changing is not blocked.
         */
        #disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}

/*
 * m_ldap_oper [EXTRA]
 *
 * This module dynamically ties users to Anope opertypes when they identify
 * via LDAP group membership. Requires m_ldap.
 *
 * Note that this doesn't give the user privileges on the IRCd, only in Services.
 */
#module
{
        name = "m_ldap_oper"

        /*
         * An optional binddn to use when searching for groups.
         * %a is replaced with the account name of the user.
         */
        #binddn = "cn=Manager,dc=anope,dc=org"

        /*
         * An optional password to bind with.
         */
        #password = "secret"

        /*
         * The base DN where the groups are.
         */
        basedn = "ou=groups,dc=anope,dc=org"

        /*
         * The filter to use when searching for users.
         * %a is replaced with the account name of the user.
         */
        filter = "(member=uid=%a,ou=users,dc=anope,dc=org)"

        /*
         * The attribute of the group that is the name of the opertype.
         * The cn attribute should match a known opertype in the config.
         */
        opertype_attribute = "cn"
}

/*
 * m_mysql [EXTRA]
 *
 * This module allows other modules to use MySQL.
 */
#module
{
        name = "m_mysql"

        mysql
        {
                /* The name of this service. */
                name = "mysql/main"
                database = "anope"
                server = "127.0.0.1"
                username = "anope"
                password = "mypassword"
                port = 3306
        }
}
/*
 * m_redis
 *
 * This module allows other modules to use Redis.
 */
#module
{
        name = "m_redis"

        /* A redis database */
        redis
        {
                /* The name of this service */
                name = "redis/main"

                /*
                 * The redis database to use. New connections default to 0.
                 */
                db = 0

                ip = "127.0.0.1"
                port = 6379
        }
}

/*
 * m_regex_pcre [EXTRA]
 *
 * Provides the regex engine regex/pcre, which uses the Perl Compatible Regular Expressions library.
 */
#module { name = "m_regex_pcre" }

/*
 * m_regex_posix [EXTRA]
 *
 * Provides the regex engine regex/posix, which uses the POSIX compliant regular expressions.
 * This is likely the only regex module you will not need extra libraries for.
 */
module { name = "m_regex_posix" }

/*
 * m_regex_tre [EXTRA]
 *
 * Provides the regex engine regex/tre, which uses the TRE regex library.
 */
#module { name = "m_regex_tre" }

/*
 * m_rewrite
 *
 * Allows rewriting commands sent to/from clients.
 */
#module { name = "m_rewrite" }
#command
{
        service = "ChanServ"; name = "CLEAR"; command = "rewrite"

        /* Enable m_rewrite. */
        rewrite = true

        /* Source message to match. A $ can be used to match anything. */
        rewrite_source = "CLEAR $ USERS"

        /*
         * Message to rewrite the source message to. A $ followed by a number, eg $0, gets
         * replaced by the number-th word from the source_message, starting from 0.
         */
        rewrite_target = "KICK $1 *"

        /*
         * The command description. This only shows up in HELP's output.
         * Comment this option to prevent the command from showing in the
         * HELP command.
         */
        rewrite_description = "Clears all users from a channel"
}

/*
 * m_proxyscan
 *
 * This module allows you to scan connecting clients for open proxies.
 * Note that using this will allow users to get the IP of your services.
 *
 * Currently the two supported proxy types are HTTP and SOCKS5.
 *
 * The proxy scanner works by attempting to connect to clients when they
 * connect to the network, and if they have a proxy running instruct it to connect
 * back to services. If services are able to connect through the proxy to itself
 * then it knows it is an insecure proxy, and will ban it.
 */
#module
{
        name = "m_proxyscan"

        /*
         * The target IP services tells the proxy to connect back to. This must be a publicly
         * available IP that remote proxies can connect to.
         */
        #target_ip = "127.0.0.1"

        /*
         * The port services tells the proxy to connect to.
         */
        target_port = 7226

        /*
         * The listen IP services listen on for incoming connections from suspected proxies.
         * This probably will be the same as target_ip, but may not be if you are behind a firewall (NAT).
         */
        #listen_ip = "127.0.0.1"

        /*
         * The port services should listen on for incoming connections from suspected proxies.
         * This most likely will be the same as target_port.
         */
        listen_port = 7226

        /*
         * An optional notice sent to clients upon connect.
         */
        #connect_notice = "We will now scan your host for insecure proxies. If you do not consent to this scan please disconnect immediately."

        /*
         * Who the notice should be sent from.
         */
        #connect_source = "OperServ"

        /*
         * If set, OperServ will add infected clients to the akill list. Without it, OperServ simply sends
         * a timed G/K-line to the IRCd and forgets about it. Can be useful if your akill list is being filled up by bots.
         */
        add_to_akill = yes

        /*
         * How long before connections should be timed out.
         */
        timeout = 5

        proxyscan
        {
                /* The type of proxy to check for. A comma separated list is allowed. */
                type = "HTTP"

                /* The ports to check. */
                port = "80,8080"

                /* How long to set the ban for. */
                time = 4h

                /*
                 * The reason to ban the user for.
                 * %h is replaced with the type of proxy found.
                 * %i is replaced with the IP of proxy found.
                 * %p is replaced with the port.
                 */
                reason = "You have an open proxy running on your host (%t:%i:%p)"
        }
}

/*
 * m_sasl
 *
 * Some IRCds allow "SASL" authentication to let users identify to Services
 * during the IRCd user registration process. If this module is loaded, Services will allow
 * authenticating users through this mechanism. Supported mechanisms are:
 * PLAIN, EXTERNAL.
 */
module { name = "m_sasl" }

/*
 * m_sasl_dh-aes [EXTRA]
 *
 * Add the DH-AES mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
module { name = "m_sasl_dh-aes" }

/*
 * m_sasl_dh-blowfish [EXTRA]
 *
 * Add the DH-BLOWFISH mechanism to SASL.
 * Requires m_sasl to be loaded.
 * Requires openssl.
 */
module { name = "m_sasl_dh-blowfish" }

/*
 * m_ssl_gnutls [EXTRA]
 *
 * This module provides SSL services to Anope using GnuTLS, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_gnutls or m_ssl_openssl, bot not both.
 */
#module
{
        name = "m_ssl_gnutls"

        /*
         * An optional certificate and key for m_ssl_gnutls to give to the uplink.
         *
         * You can generate your own certificate and key pair by using:
         *
         *   certtool --generate-privkey --bits 2048 --outfile anope.key
         *   certtool --generate-self-signed --load-privkey anope.key --outfile anope.crt
         *
         */
        cert = "data/anope.crt"
        key = "data/anope.key"

        /*
         * Diffie-Hellman parameters to use when acting as a server. This is only
         * required for TLS servers that want to use ephemeral DH cipher suites.
         *
         * This is NOT required for Anope to connect to the uplink server(s) via SSL.
         *
         * You can generate DH parameters by using:
         *
         *   certtool --generate-dh-params --bits 2048 --outfile dhparams.pem
         *
         */
#       dhparams = "data/dhparams.pem"
}

/*
 * m_ssl_openssl [EXTRA]
 *
 * This module provides SSL services to Anope using OpenSSL, for example to
 * connect to the uplink server(s) via SSL.
 *
 * You may only load either m_ssl_openssl or m_ssl_gnutls, bot not both.
 *
 */
#module
{
        name = "m_ssl_openssl"

        /*
         * An optional certificate and key for m_ssl_openssl to give to the uplink.
         *
         * You can generate your own certificate and key pair by using:
         *
         *   openssl genrsa -out anope.key 2048
         *   openssl req -new -x509 -key anope.key -out anope.crt -days 1095
         */
        cert = "data/anope.crt"
        key = "data/anope.key"

        /*
         * As of 2014 SSL 3.0 is considered insecure, but it might be enabled
         * on some systems by default for compatibility reasons.
         * You can use the following option to enable or disable it explicitly.
         * Leaving this option not set defaults to the default system behavior.
         */
        #sslv3 = no
}

/*
 * m_sql_authentication [EXTRA]
 *
 * This module allows authenticating users against an external SQL database using a custom
 * query.
 */
#module
{
        name = "m_sql_authentication"

        /* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
        engine = "mysql/main"

        /* Query to execute to authenticate. A non empty result from this query is considered a success,
         * and the user will be authenticated.
         *
         * @a@ is replaced with the user's account name
         * @p@ is replaced with the user's password
         * @n@ is replaced with the user's nickname
         * @i@ is replaced with the user's IP
         *
         * Note that @n@ and @i@ may not always exist in the case of a user identifying outside of the normal
         * nickserv/identify command, such as through the web panel.
         *
         * Furthermore, if a field named email is returned from this query the user's email is
         * set to its value.
         *
         *
         * We've included some example queries for some popular website/forum systems.
         *
         * Drupal 6: "SELECT `mail` AS `email` FROM `users` WHERE `name` = @a@ AND `pass` = MD5(@p@) AND `status` = 1"
         * e107 cms: "SELECT `user_email` AS `email` FROM `e107_user` WHERE `user_loginname` = @a@ AND `user_password` = MD5(@p@)"
         * SMF Forum: "SELECT `email_address` AS `email` FROM `smf_members` WHERE `member_name` = @a@ AND `passwd` = SHA1(CONCAT(LOWER(@a@), @p@))"
         * vBulletin: "SELECT `email` FROM `user` WHERE `username` = @a@ AND `password` = MD5(CONCAT(MD5(@p@), `salt`))"
         * IP.Board: "SELECT `email` FROM `ibf_members` WHERE `name` = @a@ AND `members_pass_hash` = MD5(CONCAT(MD5(`members_pass_salt`), MD5(@p@)))"
         */
        query = "SELECT `email_addr` AS `email` FROM `my_users` WHERE `username` = @a@ AND `password` = MD5(CONCAT('salt', @p@))"

        /*
         * If set, the reason to give the users who try to "/msg NickServ REGISTER".
         * If not set, then registration is not blocked.
         */
        #disable_reason = "To register on this network visit http://some.misconfigured.site/register"

        /*
         * If set, the reason to give the users who try to "/msg NickServ SET EMAIL".
         * If not set, then email changing is not blocked.
         */
        #disable_email_reason = "To change your email address visit http://some.misconfigured.site"
}

/*
 * m_sql_log [EXTRA]
 *
 * This module adds an additional target option to log{} blocks
 * that allows logging Service's logs to SQL. To log to SQL, add
 * the SQL service name to log:targets prefixed by sql_log:. For
 * example:
 *
 * log
 * {
 *     targets = "services.log sql_log:mysql/main"
 *     ...
 * }
 *
 * By default this module logs to the table `logs`, and will create
 * it if it doesn't exist. This module does not create any indexes (keys)
 * on the table and it is recommended you add them yourself as necessary.
 */
#module { name = "m_sql_log" }

/*
 * m_sql_oper [EXTRA]
 *
 * This module allows granting users services operator privileges and possibly IRC Operator
 * privileges based on an external SQL database using a custom query.
 */
#module
{
        name = "m_sql_oper"

        /* SQL engine to use. Should be configured elsewhere with m_mysql, m_sqlite, etc. */
        engine = "mysql/main"

        /* Query to execute to determine if a user should have operator privileges.
         * A field named opertype must be returned in order to link the user to their oper type.
         * The oper types must be configured earlier in services.conf.
         *
         * If a field named modes is returned from this query then those modes are set on the user.
         * Without this, only a simple +o is sent.
         *
         * @a@ is replaced with the user's account name
         * @i@ is replaced with the user's IP
         */
        query = "SELECT `opertype` FROM `my_users` WHERE `user_name` = @a@"
}

/*
 * m_sqlite [EXTRA]
 *
 * This module allows other modules to use SQLite.
 */
#module
{
        name = "m_sqlite"

        /* A SQLite database */
        sqlite
        {
                /* The name of this service. */
                name = "sqlite/main"

                /* The database name, it will be created if it does not exist. */
                database = "anope.db"
        }
}

/*
 * webcpanel
 *
 * This module creates a web configuration panel that allows users and operators to perform any task
 * as they could over IRC. If you are using the default configuration you should be able to access
 * this panel by visiting http://127.0.0.1:8080 in your web browser from the machine Anope is running on.
 *
 * This module requires m_httpd.
 */
#module
{
        name = "webcpanel"

        /* Web server to use. */
        server = "httpd/main";

        /* Template to use. */
        template = "default";

        /* Page title. */
        title = "Anope IRC Services";
}

/*
 * m_xmlrpc
 *
 * Allows remote applications (websites) to execute queries in real time to retrieve data from Anope.
 * By itself this module does nothing, but allows other modules (m_xmlrpc_main) to receive and send XMLRPC queries.
 */
#module
{
        name = "m_xmlrpc"

        /* Web service to use. Requires m_httpd. */
        server = "httpd/main"
}

/*
 * m_xmlrpc_main
 *
 * Adds the main XMLRPC core functions.
 * Requires m_xmlrpc.
 */
#module { name = "m_xmlrpc_main" }