#
################################################
### Managed by someone's ansible provisioner ###
################################################
# Part of: https://git.somenet.org/root/pub/somesible.git
# 2017-2024 by someone <someone@somenet.org>
#
########################################################################
#                                                                      #
#               ___                ___ ____   ____    _                #
#              |_ _|_ __  ___ _ __|_ _|  _ \ / ___|__| |               #
#               | || '_ \/ __| '_ \| || |_) | |   / _` |               #
#               | || | | \__ \ |_) | ||  _ <| |__| (_| |               #
#              |___|_| |_|___/ .__/___|_| \_\\____\__,_|               #
#                            |_|                                       #
#      ____             __ _                       _   _               #
#     / ___|___  _ __  / _(_) __ _ _   _ _ __ __ _| |_(_) ___  _ __    #
#    | |   / _ \| '_ \| |_| |/ _` | | | | '__/ _` | __| |/ _ \| '_ \   #
#    | |__| (_) | | | |  _| | (_| | |_| | | | (_| | |_| | (_) | | | |  #
#     \____\___/|_| |_|_| |_|\__, |\__,_|_|  \__,_|\__|_|\___/|_| |_|  #
#                            |___/                                     #
#                                                                      #
########################################################################
#                                                                      #
#         Unalphabeticalise the modules list at your own risk          #
#                                                                      #
########################################################################

#-#-#-#-#-#-#-#-#-#-  CONNECTIONS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   This is where you can configure which connections are allowed     #
#   and denied access onto your server. The password is optional.     #
#   You may have as many of these as you require. To allow/deny all   #
#   connections, use a '*' or 0.0.0.0/0.                              #
#                                                                     #
#  -- It is important to note that connect tags are read from the  -- #
#     TOP DOWN. This means that you should have more specific deny    #
#    and allow tags at the top, progressively more general, followed  #
#        by a <connect allow="*" (should you wish to have one).       #
#                                                                     #
# Connect blocks are searched twice for each user - once when the TCP #
# connection is accepted, and once when the user completes their      #
# registration. Most of the information (hostname, ident response,    #
# password, SSL when using STARTTLS, etc) is only available during    #
# the second search, so if you are trying to make a closed server,    #
# you will probably need a connect block just for user registration.  #
# This can be done by using <connect registered="no">                 #

<connect
         # name: Name to use for this connect block. Mainly used for
         # connect class inheriting.
         name="main"

         # allow: The IP address or hostname of clients that can use this
         # class. You can specify either an exact match, a glob match, or
         # a CIDR range here.
         allow="*"

         # maxchans: Maximum number of channels a user in this class
         # can be in at one time.
         #maxchans="20"

         # timeout: How long the server will wait before disconnecting
         # a user if they do not do anything on connect.
         # (Note, this is a client-side thing, if the client does not
         # send /NICK, /USER or /PASS)
         timeout="20"

         # pingfreq: How often the server tries to ping connecting clients.
         pingfreq="5m"

         # hardsendq: maximum amount of data allowed in a client's send queue
         # before they are dropped. Keep this value higher than the length of
         # your network's /LIST or /WHO output, or you will have lots of
         # disconnects from sendq overruns!
         # Setting this to "1M" is equivalent to "1048576", "8K" is 8192, etc.
         hardsendq="1M"

         # softsendq: amount of data in a client's send queue before the server
         # begins delaying their commands in order to allow the sendq to drain
         softsendq="10240"

         # recvq: amount of data allowed in a client's queue before they are dropped.
         # Entering "10K" is equivalent to "10240", see above.
         recvq="100K"

         # threshold: This specifies the amount of command penalty a user is allowed to have
         # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
         # ones such as /OPER have penalties up to 10.
         #
         # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
         # from processing some commands.
         threshold="20"

         # commandrate: This specifies the maximum rate that commands can be processed.
         # If commands are sent more rapidly, the user's penalty will increase and they will
         # either be fakelagged or killed when they reach the threshold
         #
         # Units are millicommands per second, so 1000 means one line per second.
         commandrate="1000"

         # fakelag: Use fakelag instead of killing users for excessive flood
         #
         # Fake lag stops command processing for a user when a flood is detected rather than
         # immediately killing them; their commands are held in the recvq and processed later
         # as the user's command penalty drops. Note that if this is enabled, flooders will
         # quit with "RecvQ exceeded" rather than "Excess Flood".
         fakelag="on"

         # localmax: Maximum local connections per IP.
         localmax="50"

         # globalmax: Maximum global (network-wide) connections per IP.
         globalmax="50"

         # resolvehostnames: If disabled, no DNS lookups will be performed on connecting users
         # in this class. This can save a lot of resources on very busy servers.
         resolvehostnames="yes"

         # useident: Defines if users in this class must respond to a ident query or not.
         useident="no"

         # usests: Whether a STS policy should be advertised to users in this class.
         # This setting only has effect when the ircv3_sts module is loaded.
         #usests="no"

         # limit: How many users are allowed in this class
         limit="5000"

         # modes: User modes that are set on users in this block on connect.
         # Enabling this option requires that the conn_umodes module be loaded.
         # This entry is highly recommended to use for/with IP cloaking/masking.
         # For the example to work, this also requires that the cloaking
         # module be loaded as well.
         modes="+xi">


<cidr ipv4clone="32" ipv6clone="128">

# MOVED TO global.secret.conf
# <include file="/etc/inspircd/global.opers.conf">
# MOVED TO inspircd.secret.conf
# <include file="/etc/inspircd/inspircd.links.conf">
<files motd="/etc/inspircd/inspircd.motd">

<channels users="60" opers="64">
<banlist chan="*" limit="128">

#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">

<options
         # prefixquit: What (if anything) users' quit messages
         # should be prefixed with.
         prefixquit="Quit: "

         # suffixquit: What (if anything) users' quit messages
         # should be suffixed with.
         suffixquit=""

         # prefixpart: What (if anything) users' part messages
         # should be prefixed with.
         prefixpart="&quot;"
         # NOTE: Use "\"" instead of "&quot;" if not using <config format="xml">

         # suffixpart: What (if anything) users' part message
         # should be suffixed with.
         suffixpart="&quot;"

         # fixedquit: Set all users' quit messages to this value.
         #fixedquit=""

         # fixedpart: Set all users' part messages in all channels
         # to this value.
         #fixedpart=""

         # syntaxhints: If enabled, if a user fails to send the correct parameters
         # for a command, the ircd will give back some help text of what
         # the correct parameters are.
         syntaxhints="yes"

         # casemapping: This sets the case mapping method to be used by the
         # server. This MUST be the same on all servers. Possible values are:
         # "ascii" (recommended)
         # "rfc1459" (default, required for linking to 2.0 servers)
         # NOTE: if you are using the nationalchars module this setting will be
         # ignored. You should use <nationalchars:casemapping> instead.
         casemapping="ascii"

         # cyclehostsfromuser: If enabled, the source of the mode change for
         # cyclehosts will be the user who cycled. This can look nicer, but
         # triggers anti-takeover mechanisms of some obsolete bots.
         cyclehostsfromuser="no"

         # announcets: If set to yes, when the timestamp on a channel changes, all users
         # in the channel will be sent a NOTICE about it.
         announcets="yes"

         # allowmismatch: Setting this option to yes will allow servers to link even
         # if they don't have the same "optionally common" modules loaded. Setting this to
         # yes may introduce some desyncs and unwanted behaviour.
         allowmismatch="no"

         # defaultbind: Sets the default for <bind> tags without an address. Choices are
         # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
         # falling back to IPv4 otherwise.
         defaultbind="ipv4"

         # hostintopic: If enabled, channels will show the host of the topic setter
         # in the topic. If set to no, it will only show the nick of the topic setter.
         hostintopic="yes"

         # pingwarning: If a server does not respond to a ping within this period,
         # it will send a notice to opers with snomask +l informing that the server
         # is about to ping timeout.
         pingwarning="15"

         # serverpingfreq: How often pings are sent between servers.
         serverpingfreq="1m"

         # splitwhois: Whether to split private/secret channels from normal channels
         # in WHOIS responses. Possible values for this are:
         # 'no' - list all channels together in the WHOIS response regardless of type.
         # 'split' - split private/secret channels to a separate WHOIS response numeric.
         # 'splitmsg' - the same as split but also send a message explaining the split.
         splitwhois="no"

         # defaultmodes: What modes are set on a empty channel when a user
         # joins it and it is unregistered.
         defaultmodes="not"

         # xlinemessage: This is the text that is sent to a user when they are
         # banned from the server.
         xlinemessage="You're banned! Email irc@example.com with the ERROR line below for help."

         # allowzerolimit: If enabled then allow a limit of 0 to be set on channels.
         # This is non-standard behaviour and should only be enabled if you need to
         # link with servers running 2.0. Defaults to yes.
         allowzerolimit="yes"

         # modesinlist: If enabled then the current channel modes will be shown
         # in the /LIST response. Defaults to yes.
         modesinlist="yes"

         # exemptchanops: Allows users with with a status mode to be exempt
         # from various channel restrictions. Possible restrictions are:
         #  - anticaps        Channel mode +B - blocks messages with too many capital
         #                    letters (requires the anticaps module).
         #  - auditorium-see  Permission required to see the full user list of
         #                    a +u channel (requires the auditorium module).
         #  - auditorium-vis  Permission required to be visible in a +u channel
         #                    (requires the auditorium module).
         #  - blockcaps       Channel mode +B - blocks messages with too many capital
         #                    letters (requires the blockcaps module).
         #  - blockcolor      Channel mode +c - blocks messages with formatting codes
         #                    (requires the blockcolor module).
         #  - censor          Channel mode +G - censors messages based on the network
         #                    configuration (requires the censor module).
         #  - filter          Channel mode +g - blocks messages containing the given
         #                    glob mask (requires the chanfilter module).
         #  - flood           Channel mode +f - kicks (and bans) on text flood of a
         #                    specified rate (requires the messageflood module).
         #  - nickflood       Channel mode +F - blocks nick changes after a specified
         #                    rate (requires the nickflood module).
         #  - noctcp          Channel mode +C - blocks any CTCPs to the channel
         #                    (requires the noctcp module).
         #  - nonick          Channel mode +N - prevents users on the channel from
         #                    changing nicks (requires the nonicks module).
         #  - nonotice        Channel mode +T - blocks /NOTICEs to the channel
         #                    (requires the nonotice module).
         #  - regmoderated    Channel mode +M - blocks unregistered users from
         #                    speaking (requires the services account module).
         #  - stripcolor      Channel mode +S - strips formatting codes from
         #                    messages (requires the stripcolor module).
         #  - topiclock       Channel mode +t - limits changing the topic to (half)ops
         # You can also configure this on a per-channel basis with a channel mode.
         # See m_exemptchanops in modules.conf.example for more details.
         exemptchanops="censor:o filter:o nickflood:o nonick:v regmoderated:o"

         # invitebypassmodes: This allows /INVITE to bypass other channel modes.
         # (Such as +k, +j, +l, etc.)
         invitebypassmodes="yes"

         # nosnoticestack: This prevents snotices from 'stacking' and giving you
         # the message saying '(last message repeated X times)'. Defaults to no.
         nosnoticestack="no">


<security
          # allowcoreunload: If this value is set to yes, Opers will be able to
          # unload core modules (e.g. core_privmsg).
          allowcoreunload="no"

          # announceinvites: This option controls which members of the channel
          # receive an announcement when someone is INVITEd. Available values:
          # 'none' - don't send invite announcements
          # 'all' - send invite announcements to all members
          # 'ops' - send invite announcements to ops and higher ranked users
          # 'dynamic' - send invite announcements to halfops (if available) and
          #             higher ranked users. This is the recommended setting.
          announceinvites="dynamic"

          # hideulines: If this value is set to yes, U-lined servers will
          # be hidden from non-opers in /LINKS and /MAP.
          hideulines="no"

          # flatlinks: If this value is set to yes, /MAP and /LINKS will
          # be flattened when shown to non-opers.
          flatlinks="no"

          # hideserver: When defined, the given text will be used in place
          # of the server name in public messages. As with <server:name> this
          # does not need to resolve but does need to be a valid hostname.
          #
          # NOTE: enabling this will cause users' idle times to only be shown
          # when a remote whois (/WHOIS <nick> <nick>) is used.
          #hideserver="*.example.com"

          # hidebans: If this value is set to yes, when a user is banned ([KGZ]-lined)
          # only opers will see the ban message when the user is removed
          # from the server.
          hidebans="no"

          # hidekills: If defined, replaces who executed a /KILL with a custom string.
          hidekills=""

          # hideulinekills: Hide kills from clients of ulined servers from server notices.
          hideulinekills="yes"

          # hidesplits: If enabled, non-opers will not be able to see which
          # servers split in a netsplit, they will only be able to see that one
          # occurred (If their client has netsplit detection).
          hidesplits="no"

          # maxtargets: Maximum number of targets per command.
          # (Commands like /NOTICE, /PRIVMSG, /KICK, etc)
          maxtargets="20"

          # customversion: A custom message to be displayed in the comments field
          # of the VERSION command response. This does not hide the InspIRCd version.
          customversion=""

          # runasuser: If this is set, InspIRCd will attempt to switch
          # to run as this user, which allows binding of ports under 1024.
          # You should NOT set this unless you are starting as root.
          # NOT SUPPORTED/NEEDED UNDER WINDOWS.
          #runasuser=""

          # runasgroup: If this is set, InspIRCd will attempt to switch
          # to run as this group, which allows binding of ports under 1024.
          # You should NOT set this unless you are starting as root.
          # NOT SUPPORTED/NEEDED UNDER WINDOWS.
          #runasgroup=""

          # restrictbannedusers: If this is set to yes, InspIRCd will not allow users
          # banned on a channel to change nickname or message channels they are
          # banned on. This can also be set to silent to restrict the user but not
          # notify them.
          restrictbannedusers="yes"

          # genericoper: Setting this value to yes makes all opers on this server
          # appear as 'is a server operator' in their WHOIS, regardless of their
          # oper type, however oper types are still used internally. This only
          # affects the display in WHOIS.
          genericoper="no"

          # userstats: /STATS commands that users can run (opers can run all).
          userstats="PugkqZR">


<limits
        maxnick="30"
        maxchan="64"
        maxmodes="20"
        maxident="10"
        maxhost="64"
        maxquit="255"
        maxtopic="307"
        maxkick="255"
        maxreal="128"
        maxaway="200">


#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Logging
# -------
#
# Logging is covered with the <log> tag, which you may use to change
# the behaviour of the logging of the IRCd.
#
# An example log tag would be:
#  <log method="file" type="OPER" level="default" target="opers.log">
# which would log all information on /OPER (failed and successful) to
# a file called opers.log.
#
# There are many different types which may be used, and modules may
# generate their own. A list of useful types:
#  - USERS - information relating to user connection and disconnection
#  - OPER - successful and failed oper attempts
#  - KILL - kill related messages
#  - FILTER - messages related to filter matches (filter module)
#  - CONFIG - configuration related messages
#  - COMMAND - die and restart messages, and messages related to unknown user types
#  - SOCKET - socket engine informational/error messages
#  - MODULE - module related messages
#  - STARTUP - messages related to starting up the server
#
# You may also log *everything* by using a type of *, and subtract things out
# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
#
# Useful levels are:
#  - default (general messages, including errors)
#  - sparse (misc error messages)
#  - debug (debug messages)
#
# Some types only produce output in the debug level, those are:
#  - BANCACHE - ban cache debug messages
#  - CHANNELS - information relating to joining/creating channels
#  - CULLLIST - debug messages related to issues with removing users
#  - RESOLVER - DNS related debug messages
#  - CONNECTCLASS - Connection class debug messages
#  - USERINPUT
#  - USEROUTPUT
#
# If your server is producing a high levels of log messages you can also set the
# flush="[positive number]" attribute to specify how many log messages should be
# buffered before flushing to disk. You should probably not specify this unless
# you are having problems.
#
# The following log tag is highly default and uncustomised. It is recommended you
# sort out your own log tags. This is just here so you get some output.
#<log method="file" type="* -USERINPUT -USEROUTPUT" level="default" target="/tmp/ircd.log">

<whowas groupsize="100" maxgroups="100000" maxkeep="90d">

<badnick nick="BotServ"  reason="Reserved for a network service">
<badnick nick="ChanServ" reason="Reserved for a network service">
<badnick nick="Global"   reason="Reserved for a network service">
<badnick nick="HostServ" reason="Reserved for a network service">
<badnick nick="MemoServ" reason="Reserved for a network service">
<badnick nick="NickServ" reason="Reserved for a network service">
<badnick nick="OperServ" reason="Reserved for a network service">
<badnick nick="StatServ" reason="Reserved for a network service">

<exemptfromfilter target="BotServ">
<exemptfromfilter target="ChanServ">
<exemptfromfilter target="Global">
<exemptfromfilter target="HostServ">
<exemptfromfilter target="MemoServ">
<exemptfromfilter target="NickServ">
<exemptfromfilter target="OperServ">
<exemptfromfilter target="StatServ">

<badhost host="root@*" reason="Don't irc as root!">
#<badhost host="*@172.32.0.0/16" reason="This subnet is bad.">

<exception host="*@localhost" reason="Never block localhost.">
<exception host="*@127.0.0.1" reason="Never block localhost.">

#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This optional tag allows you to specify how wide a gline, eline,    #
# kline, zline or qline can be before it is forbidden from being      #
# set. By setting hostmasks="yes", you can allow all G, K, E lines,   #
# no matter how many users the ban would cover. This is not           #
# recommended! By setting ipmasks="yes", you can allow all Z lines,   #
# no matter how many users these cover too. Needless to say we        #
# don't recommend you do this, or, set nickmasks="yes", which will    #
# allow any qline.                                                    #
#                                                                     #

<insane
        # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
        hostmasks="no"

        # ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
        ipmasks="no"

        # nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
        nickmasks="no"

        # trigger: What percentage of users on the network to trigger
        # specifying an insane ban as. The default is 95.5%, which means
        # if you have a 1000 user network, a ban will not be allowed if it
        # will be banning 955 or more users.
        trigger="95.5">


<include file="/etc/inspircd/global.modules.conf">
<include file="/etc/inspircd/global.secret.conf">